PTFE-Coated Fabric Adhesive Tapes

Versiv PTFE-coated glass fabric tapes provide dimensional stability, high tensile strength, and edge-tear resistance, with a low-friction, non-stick surface for easy release.

Available with silicone or acrylic adhesives, they are commonly used in molding and packaging processes as release liners and tool masking, helping protect surfaces, support clean release, and reduce residue buildup.

Two rolls of adhesive tapes made of PTFE-coated glass fabrics, side by side.

silicone adhesive

Designed for extreme temperature and pressure applications, Versiv PTFE-Coated Fabric Tapes with silicone adhesive perform in continuous operating temperatures from -99 °F to +500 °F.

Silicone-based adhesive systems offer good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.

Acrylic Adhesive

Versiv PTFE-Coated Fabric Tapes with acrylic adhesive perform in continuous operating temperatures from -40 °F to +351 °F.

Acrylic-based adhesive systems offer exceptional solvent resistance, strong adhesion to metal, and superior weathering characteristics. At elevated temperatures, they also support improved wet-out, increasing both adhesion and tack.

MATERIAL

ADHESIVE
TYPE

WEIGHT
(g/m²)

THICKNESS
(mm)

ADHESIVE
THICKNESS (mm)

TENSILE
STRENGTH (N/cm)

180° PEEL ADH.
STRENGTH (N/cm)

PTFE
CONTENT (%)

CS205 A

Acrylic

250

0.127

0.065

250 x 230

4

58%

CS310 A

Acrylic

470

0.255

0.065

500 x 380

5.3

56%

CS103 S

Silicone

155

0.076

0.045

130 x 90

5.2

69%

CS203 S

Silicone

130

0.076

0.045

120 x 90

5.3

63%

CLPSA 4 S

Silicone

210

0.1

0.045

150 x 120

4.7

77%

CS105-2 AS S

Silicone

270

0.127

0.045

240 x 220

5.2

61%

CS105-2 S

Silicone

270

0.127

0.045

300 x 250

6.4

61%

CS105 S

Silicone

270

0.127

0.045

240 x 220

5.2

61%

CS205 AS S

Silicone

250

0.127

0.045

200 x 190

6.2

58%

CS205 S

Silicone

250

0.127

0.045

250 x 230

6.2

58%

CS305 S

Silicone

220

0.127

0.045

230 x 230

6

52%

CS106-2 S

Silicone

315

0.145

0.045

280 x 280

6.3

67%

CLPSA 6 GX S

Silicone

325

0.152

0.045

280 x 260

5.4

68%

CS106-2 SILVER S

Silicone

310

0.152

0.045

300 x 300

5.9

66%

CS206 AS S

Silicone

290

0.152

0.045

250 x 210

6.4

64%

CS206 S

Silicone

300

0.152

0.045

280 x 260

6.3

65%

CS110-1 S

Silicone

540

0.255

0.045

400 x 360

7.4

62%

CS210-1 S

Silicone

490

0.255

0.045

540 x 300

6.3

58%

CS210-2 S

Silicone

500

0.255

0.045

580 x 480

6.3

60%

CS310 AS S

Silicone

470

0.255

0.045

500 x 380

7.5

56%

CS310 S

Silicone

470

0.255

0.045

500 x 380

7.5

56%

CS410 S

Silicone

420

0.255

0.045

460 x 370

7.8

51%

CS314 S

Silicone

630

0.355

0.045

660 x 510

7.9

54%

MATERIAL

ADHESIVE
TYPE

WEIGHT
(oz/yd²)

THICKNESS
(mil)

ADHESIVE
THICKNESS (mil)

TENSILE
STRENGTH (lb/in)

180° PEEL
ADHESION
STRENGTH (lb/in)

PTFE
CONTENT (%)

CS205 A

Acrylic

7.4

5

2.6

143 x 131

2

58%

CS310 A

Acrylic

13.9

10

2.6

286 x 217

3

56%

CS103 S

Silicone

4.6

3

1.8

74 x 51

3

69%

CS203 S

Silicone

3.8

3

1.8

69 x 51

3

63%

CLPSA 4 S

Silicone

6.2

4

1.8

86 x 69

3

77%

CS105-2 AS S

Silicone

8

5

1.8

137 x 126

3

61%

CS105-2 S

Silicone

8

5

1.8

171 x 143

4

61%

CS105 S

Silicone

8

5

1.8

137 x 126

3

61%

CS205 AS S

Silicone

7.4

5

1.8

114 x 108

4

58%

CS205 S

Silicone

7.4

5

1.8

143 x 131

4

58%

CS305 S

Silicone

6.5

5

1.8

131 x 131

3

52%

CS106-2 S

Silicone

9.3

5.7

1.8

160 x 160

4

67%

CLPSA 6 GX S

Silicone

9.6

6

1.8

160 x 148

3

68%

CS106-2 SILVER S

Silicone

9.1

6

1.8

171 x 171

3

66%

CS206 AS S

Silicone

8.6

6

1.8

143 x 120

4

64%

CS206 S

Silicone

8.8

6

1.8

160 x 148

4

65%

CS110-1 S

Silicone

15.9

10

1.8

228 x 206

4

62%

CS210-1 S

Silicone

14.5

10

1.8

308 x 171

4

58%

CS210-2 S

Silicone

14.7

10

1.8

331 x 274

4

60%

CS310 AS S

Silicone

13.9

10

1.8

286 x 217

4

56%

CS310 S

Silicone

13.9

10

1.8

286 x 217

4

56%

CS410 S

Silicone

12.4

10

1.8

263 x 211

4

51%

CS314 S

Silicone

18.6

14

1.8

377 x 291

5

54%

IMPORTANT: The values presented are typical values and should not be used for specification purposes.

Contact your Versiv representative for more information.

Typical Properties

Features and Benefits

Heat resistant: perform at continuous temperatures up to 500°F for silicone and 350°F for acrylic adhesive systems
Durable: Resistant to tears, punctures and abrasion. This protection results in less material changes
Customizable: Versatility to be custom designed to fit your application and installation needs
Texture: Smooth or controlled-texture surfaces to support consistent release and optimal post-processing.
Coating: Excellent non-stick performance, offering great alternative to requiring high maintenance release spray applications
Release kept in place through the use of adhesive

Frequent Applications

Wind blade manufacturing
Versiv PTFE Adhesive Tape Systems provide a clean, durable release surface for wind blade production. They support easy demolding, reduced resin transfer, and more pulls before cleanup, with minimal residue after removal.

Wind Blade Manufacturing >

Industrial packaging
Frequently used by the packaging industry for their non-stick properties - as a release surface on heat sealers, blister formation and form-fill-seal equipment.

Industrial applications >

Documentation

Versiv Adhesive Tapes: Storage Recommendations

Shelf-life for Versiv products under recommended storage conditions: Silicone adhesive PSA tapes - 18 Months; Acrylic adhesive PSA tapes - 24 Months

Materials Regulatory Data Sheet

Compliance information: California’s Proposition 65, TSCA (Toxic Substances Control Act of 1976) and more.

Rigorous testing standards

Versiv develops custom application testing based on each of our partner’s product uses in order to create the best possible solution. Some tests that are included but are not limited to environmental, durability, and reliability testing to give you peace of mind making sure that products work in the harshest environments. Our testing begins during the co-development process to develop relevant tests and gather data that allows us to create market-ready solutions quickly.

Some of our tests:

FTMS 191A-5041
FTMS 191A-5030
FTMS 191A-5102
FTMS 191A-5136
ASTM D149-81