PTFE-COATED

Laminated Fabrics

Versiv Laminated Fabrics combine features of multi-layer fluoropolymer cast films with the mechanical properties of woven fiberglass fabrics.

These non-porous and non-stick release materials provide high-strength and excellent flexibility, as well as longer lifetime in continuous use.

MATERIAL

THICKNESS
(mm)

WEIGHT
(g/m²)

TENSILE
STRENGTH (N/cm)

TRAP TEAR
(N)

PTFE
CONTENT (%)

CL4 SGB6-04

open_in_new

picture_as_pdf

0.11

210

150 x 120

13 x 9

77%

CL5

open_in_new

picture_as_pdf

0.12

220

120 x 90

13 x 8

CL6 GX

open_in_new

picture_as_pdf

0.16

325

280 x 260

18 x 15

68%

CLF907

open_in_new

picture_as_pdf

0.177

350

290 x 250

19 x 15

70%

CL3300 ULTRA

open_in_new

picture_as_pdf

0.23

434

570 x 440

68 x 40

71 %

CL3320 ULTRA

open_in_new

picture_as_pdf

0.260

563

480 x 380

60 x 0

75 %

CL11

open_in_new

picture_as_pdf

0.28

505

500 x 400

40 x 35

59%

CLF910

open_in_new

picture_as_pdf

0.295

590

520 x 460

40 x 38

66%

CLF916

open_in_new

picture_as_pdf

0.406

900

700 x 550

95 x 80

68%

MATERIAL

THICKNESS
(mil)

WEIGHT
(oz/yd²)

TENSILE
STRENGTH (lb/in)

TRAP TEAR
(lb)

PTFE
CONTENT (%)

CL4 SGB6-04

open_in_new

picture_as_pdf

6.2

85 x 70

2.9 x 2

77%

CL5

open_in_new

picture_as_pdf

6.5

70 x 50

2.9 x 1.8

CL6 GX

open_in_new

picture_as_pdf

9.6

160 x 150

4 x 3.4

68%

CLF907

open_in_new

picture_as_pdf

10.3

165 x 145

4.3 x 3.4

70%

CL3300 ULTRA

open_in_new

picture_as_pdf

12.8

325 x 250

15 x 9

71 %

CL3320 ULTRA

open_in_new

picture_as_pdf

17.4

300 x 265

23 x 22

75 %

CL11

open_in_new

picture_as_pdf

14.9

285 x 230

9 x 7.9

59%

CLF910

open_in_new

picture_as_pdf

17.4

295 x 265

9 x 8.5

66%

CLF916

open_in_new

picture_as_pdf

26.5

400 x 315

21.4 x 18

68%

IMPORTANT: The values presented are typical values and should not be used for specification purposes.

Contact your Versiv representative for more information.

Typical Properties

Features and Benefits of PTFE Laminated Fabrics

Easier to clean: no anchor points for contaminants
Longer retention of mechanical properties: better protection for the reinforcement.
Longer-lasting in continuous use applications
Consistent thickness over fabric “knuckles”
Low permeation: providing a chemical and vapor barrier when used in energy or environmental applications

Low grease penetration
High strength and excellent flexibility
Higher value: can use thinner materials
Energy savings: turndown platen temperatures
Higher product throughput: quicker processing cycles

Documentation

Versiv PTFE Coated and Laminated Fabrics: Storage Recommendations

Shelf-life under recommended storage conditions: Unlimited

Versiv PTFE Coated and Laminated Fabrics: Safe Use Instruction Sheet

Versiv PTFE Coated and Laminated Fabrics: Natural Colour Variations

Materials Regulatory Data Sheet

Compliance information: REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), RoHS (Restriction of Hazardous Substances), (EU) 2021/1297 - PFCA's, California’s Proposition 65, TSCA (Toxic Substances Control Act of 1976) and more.

Rigorous testing standards

Versiv develops custom application testing based on each of our partner’s product uses in order to create the best possible solution. Some tests that are included but are not limited to environmental, durability, and reliability testing to give you peace of mind making sure that products work in the harshest environments. Our testing begins during the co-development process to develop relevant tests and gather data that allows us to create market-ready solutions quickly.

Some of our tests:

FTMS 191A-5041
FTMS 191A-5030
FTMS 191A-5102
FTMS 191A-5136
ASTM D149-81