By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Cookies Policy and Privacy Policy for more information.

PTFE-Coated Fabric Adhesive Tapes

Versiv PTFE coated glass fabrics tapes provide dimensional stability, high tensile strength and edge tear.
Versiv Tapes provide a release surface and exhibit a remarkably low coefficient of friction and non-stick properties. Anti-static PTFE coated glass yields improved thermal conductivity and static dissipation. Available with silicone or acrylic adhesives, PTFE glass applications include heat sealing, PVCU welding and low friction release surface liners for conveyors.
Contact us
Two rolls of adhesive tapes made of PTFE-coated glass fabrics, side by side.
silicone adhesive
Perfect for extreme temperature pressure applications, Versiv PTFE fabrics and silicone adhesive composites perform in continuous operating temperatures from -73°C to +260°C.
Silicone-based adhesive systems also exhibit good chemical resistance, retain electrical properties and remove cleanly with little or no residue.
Acrylic Adhesive
The acrylic version of Versiv PTFE Coated Fabric tapes perform in continuous operating temperatures from -40 °C to +177 °C.
Avrylic-based adhesive systems also exhibit exceptional solvent resistance, excellent adhesion to metal, superior weathering and aging characteristics. These tapes have an excellent shelf life and when exposed to elevated temperatures their ability to wet-out improves, increasing both adhesion and tack properties.

Typical Properties

MATERIAL
ADHESIVE 
TYPE
WEIGHT
(g/m2)
THICKNESS
(mm)
ADHESIVE 
THICKNESS (mm)
TENSILE
STRENGTH (N/cm)
180° PEEL ADHESION 
STRENGTH (N/cm)
PTFE 
CONTENT (%)
TECHNICAL
DATA SHEET
CS205 A
Acrylic
250
0.127
0.065
250 x 230
4
58%
open_in_new
CS310 A
Acrylic
470
0.255
0.065
500 x 380
5.3
56%
open_in_new
CS103 S
Silicone
155
0.076
0.045
130 x 90
5.2
69%
open_in_new
CS203 S
Silicone
130
0.076
0.045
120 x 90
5.3
63%
open_in_new
CLPSA 4 S
Silicone
210
0.100
0.045
150 x 120
4.7
77%
open_in_new
CS105 S
Silicone
270
0.127
0.045
240 x 220
5.2
61%
open_in_new
CS105-2 AS S
Silicone
270
0.127
0.045
240 x 220
5.2
61%
open_in_new
CS105-2 S
Silicone
270
0.127
0.045
300 x 250
6.4
61%
open_in_new
MATERIAL
ADHESIVE 
TYPE
WEIGHT
(oz/yd2)
THICKNESS
(mil)
ADHESIVE 
THICKNESS (mil)
TENSILE
STRENGTH (lb/in)
180° PEEL 
ADHESION 
STRENGTH (lb/in)
PTFE 
CONTENT (%)
TECHNICAL
DATA SHEET
CS205 A
Acrylic
7.4
5.0
2.6
143 x 131
2
58%
open_in_new
CS310 A
Acrylic
13.9
10.0
2.6
286 x 217
3
56%
open_in_new
CS103 S
Silicone
4.6
3.0
1.8
74 x 51
3
69%
open_in_new
CS203 S
Silicone
3.8
3.0
1.8
69 x 51
3
63%
open_in_new
CLPSA 4 S
Silicone
6.2
4.0
1.8
86 x 69
3
77%
open_in_new
CS105 S
Silicone
8.0
5.0
1.8
137 x 126
3
61%
open_in_new
CS105-2 AS S
Silicone
8.0
5.0
1.8
137 x 126
3
61%
open_in_new
CS105-2 S
Silicone
8.0
5.0
1.8
171 x 143
4
61%
open_in_new
IMPORTANT: The values presented are typical values and should not be used for specification purposes.
Contact your Versiv representative for more information.
Features and Benefits
  • Heat resistant: perform at continuous temperatures up to 260°C for silicone and 177°C for acrylic adhesive systems
  • Durable: Resistant to tears, punctures and abrasion. This protection results in less material changes
  • Customisable: Versatility to be custom designed to fit your application and installation needs
  • Coating: Excellent non-stick performance, offering great alternative to requiring high maintenance release spray applications
  • Effective release: Excellent release for guide rails, chutes and slides will slide better with PTFE tapes applied to the sliding surface
  • Release kept in place through the use of adhesive
Applications
Industrial packaging
Frequently used by the packaging industry for their non-stick properties - as a release surface on heat sealers, blister formation and form-fill-seal equipment.
Electronics
Effective insulation materials for wires and cables in electronics to provide thermal and electrical insulation. Also ideal for bonding and sealing electronic components.
Electronics and Communication applications >
Aerospace
Excellent PTFE coating release surface in the composite aircraft industry.
Aerospace applications >
KEY TAKEAWAYS
PTFE-coated fabrics-based tapes offer unique features and benefits that cater to a broad spectrum of industrial needs. Their versatility, durability, and resistance to extreme conditions make them valuable materials in many applications across different industries. Their chief properties include temperature and chemical resistance, and mechanical strength.
Rigorous testing standards
Versiv develops custom application testing based on each of our partner’s product uses in order to create the best possible solution. Some tests that are included but are not limited to environmental, durability, and reliability testing to give you peace of mind making sure that products work in the hardest environments. Our testing begins during the co-development process to develop relevant tests and gather data that allows us to create market-ready solutions quickly.
Some of our tests:
  • FTMS 191A-5041

  • FTMS 191A-5030

  • FTMS 191A-5102

  • FTMS 191A-5136

  • ASTM D149-81

How can we help?
Talk to our team of engineers to start working on your solution today!